0
Scott Ashwill
r7000
0 Subscribers
Submit Answer
1 Answers
Best Answer
0
If 2.4ghz and 5ghz of the channel are flickering thatย means router isย communicating with the devices in the home network .
Please follow these instructions.
Step 1: Check if a firmware upgrade is available or not. If it does not helps then
Step 2: Try resetting the router to factory default, to see if it sorts out the wireless. The wireless could be failing.
A simple power cycle to your router can resolve this issue and do look for any firmware update.
To Resolve this issue kindly follow these steps:-
1.Reboot the cable modem.
2.Reboot the lnksys router.
3.Update the firmware of your router.
4.Verify if signal is strong through the cable modem.
5.Disable WPS within the router admin (Advanced Settings > Wireless > Wi-Fi Protected Setup).
At last if issue still persists kindly reset your device .
For any help feel free to call us back on 1-800-603-4024.
All you need to do to resolve this issue are:
> Turn off the modem wait for 1 minute
> Turn off the router wait for 1 minute
> Keep both modem and router of for at least 5 Minutes
> first Turn on the modem and then after 1 minute turn on the router
> Pull up your router page update the firmware of the router
> If you think the issue is still not resolved reset the router and reconfigure it.
Note: You need to keep patience during the power cycle process.
You can go ahead and power cycle all your devices and wait for at least 5 minutes before turning it own again.
This will definitely resolve your issue.