0
Robert Kindred
How to setup a linksys router EA8300 without ethernet connection to the computer?
0 Subscribers
Submit Answer
0 Answers
In order to set up the Linksys router. First of all you need to make sure you have a proper connection with modem. Like ,Linksys router’s wire should be connected with wall and you need to connect the cable from the modem to router’s yellow ethernet port and the other cable should be connected from the router’s port no 1 to the computer. Now you need to check the network statistics by doing IPCONFIG and you need to open any browser and use the website http://www.linksyssmartwifi.com or you can use the IP 192.168.1.1. and you will get the setup wizard. After that you can follow the instructions and router will successfully done.
I have done for myself and worked for me
Require attachment of Ethernet cable b/w router and modem and it should be in coloured port of router from modem.
Attach Ethernet cable from any port of your router to your computer
Open your browser and type http://linksyssmartwifi.com or 192.168.1.1.
You will see setup wizard on your screen just need to follow steps.
After setup you can remove Ethernet cable from your computer.
To setup your Linksys router you need to follow these steps:-
You need to plug in a cable from your existing modem to internet port of your router.
after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
1. Press windows + R key that will open run window for you.
2. Type CMD in the run box.
3. Open Ipconfig and check network statistics.
4. Open your default gateway in any browser.
5. Type your user name and password .
6. that will open a setup wizard for you so follow the steps and you are good to go.
7. while following the setup wizard kindly make sure the settings you are choosing is correct
i.e time zone and wireless network name and key.
8. kindly upgrade the router firmware as well if there is any update pending over there.
if problem still persists you can reset your router and follow the same steps.
For any help feel free to call us back on 1-800-603-4024.
Please follow the steps below to setup the Linksys Router:
> Connect a ethernet cable from your modems LAN port to the Router Internet Port
> Then connect your computer Via wireless or Ethernet cable to the router
> pull up a browser and at the very top type in 192.168.1.1 or https://linksyssmartwifi.com
> Linksys setup wizard will appear just follow the instruction and complete the setup