0
stewart kunkel
re450
0 Subscribers
Submit Answer
0 Answers
You need to go in to the network settings on the printer panel .
Here you will see the wireless protected set up or push button method.
Select it and press the wps button on your router at the same time.
Within 2 minutes your printer will be connected to the router .
Try to make a print out from your printer and it will work.
Go into the menu or the settings of your printer on the printer look for Wireless setup wizard under it look for Wireless protected setup or PBC/ WPS/ AOSS
Start the WPS or the PBC on the printer and at the same time press the WPS button the extender for 3 Seconds and within 2 minutes the printer will notify you that the setup is complete and it will give you a confirmation printout with the network connectivity details.
once it tells you the connection is Ok, Try to pint a document from any device and see if that prints.
To setup your printer kindly follow these steps:-
1. on your printer panel you need to press wi fi button then you will see a blinking light over there.
2. then you need to go for wireless settings under settings you need to look for wireless setup
wizard.
3. your printer will search for available networks.
4. select your network name and give the right password to it.
5. click on connect it will be connected then you can print test wireless settings page .
6. then you need to download software for your printer from official website.
7. after downloading just follow the setup wizard and you are good to go now.
(you can also connect your printer by wps method)
For any help feel free to call us back on 1-800-603-4024.