0
Frank Edds
Ho to setup my tplink Router Archer c7 with an existing router modem
0 Subscribers
Submit Answer
0 Answers
In order to setup your Tplink Router Archer C2600 with your Arris modem you would need to follow the following steps :
> Connect a Ethernet cable from your modem LAN port to Internet port of the Tplink router, Once you see a solid light for the internet on the router.
> connect your computer wireless or via Ethernet to the Tplink router to the default name or SSID using the default password from the back of the router.
> pull up a browser and at the top on the address bar type in 192.168.0.1 or logon to http://www.tplinkwifi.net
> sigh in with username :admin , password :admin then click on the quick setup select your time zone.
> select the internet settings as auto detect, it will select Dynamic Ip automatically.
> Next select do not clone the MAC of this computer.
>create you name and password if you want to
> The setup is complete connect your computer back to the new network.
To setup your tp link router kindly follow these steps:-
You need to plug in a cable from your Arris modem to internet port of your router.
after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
1. Press windows + R key that will open run window for you.
2. Type CMD in the run box.
3. Open Ipconfig and check network statistics.
4. Open your default gateway in any browser.
5. Type your user name and password .
6. that will open a setup wizard for you so follow the steps and you are good to go.
7. while following the setup wizard kindly make sure the settings you are choosing is correct
i.e time zone and wireless network name and key.
8. kindly upgrade the router firmware as well if there is any update pending over there.
if problem still persists you can reset your router and follow the same steps.
For any help feel free to call us back on 1-800-603-4024.