0
shirleyflorida
netgear c3700
0 Subscribers
Submit Answer
0 Answers
1. Locate the Reset button on the back of your cable modem router.
2. Using a paper clip or similar object, press and hold the Reset button for about seven seconds.
3. Release the Reset button and wait for your cable modem router to reboot.
4. Factory default settings are restored.
Resetting a netgear c3700 router will reset/erase all the configuration settings saved in the router.
If you forgot, this will reset the admin and password login to the router and WiFi password.
Use a paper clip to press and hold the small (restore factory settings) button for about 7-10 seconds.
If problem still persist call us at 1-800-603-4024 and get it fixed from expertise.
You can simply reset your C 3700 router with the help of paper clip by holding reset button for atleast 20-30 seconds and re setup the device.
To setup your C 3700 router you need to follow these steps:-
You need to plug in a cable from your existing modem to internet port of your router.
after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
1. Press windows + R key that will open run window for you.
2. Type CMD in the run box.
3. Open Ipconfig and check network statistics.
4. Open your default gateway in any browser.
5. Type your user name and password .now it will be (username-admin, password-password)
6. that will open a setup wizard for you so follow the steps while following the steps it will ask you
to change admin credentials so set that as per your choice.
7. while following the setup wizard kindly make sure the settings you are choosing is correct
i.e time zone and wireless network name and key.
8. kindly upgrade the router firmware as well if there is any update pending over there.
For any help feel free to call us back on 1-800-603-4024.
You will see the small reset pin hole or reset button on the back of your modem router.
You need to hold it down while your router is on for atleast 15-20 seconds
All the lights on it will starts blinking.
Unplug it from the wall wait for 1-2 mins and connect it back again and your modem router is reseted now and ready to set up again.