0
belva
AFTER SETTING UP MY EXTENDER MY TAB IS NOT LOADING NETFLIX
0 Subscribers
Submit Answer
0 Answers
As you have mentioned that after setting up your extender you are not able to access netflix on your tab, In this scenario kindly check whether your tab is in range of extender network or not. Extender should be properly configured kindly check that as well. In case problem still persists kindly reset your extender with the help of paper clip and reconfigure your extender. To reconfigure your extender kindly follow these steps:-
There are several ways to connect your Tp Link Re 450 extender i.e ethernet cable method ,wps method and many more but i am sharing wps method here for wps method you need to follow these steps:-
1. connect your extender in a direct wall socket near by your router for setup.
2. press wps button on your extender for 3-5 seconds.
3. press wps button on your router (you can do it by accessing router main page also).
4. it will be connected to your routers network.
5. you will see your network name with ext affixed in it.
6. connect to the same network .
7. it will open a setup wizard for you.
8. follow the on screen instructions and you are good to go now.
for any question & query feel free to call us on 1-800-603-4024
TPlink-TL RE 450 extender Setup –
Plug your extender into power socket . Avoid surge protector /Extensions !
You need to reset the extender so hold the reset button on extender for 25 seconds and release it.
1-Connect your device to extender’s network .
2-Open your Browser.
3-Type http://tplinkrepeater.net or 192.168.0.250 / 192.168.0.254 in address bar.
4-You need to login now with default login:-Username-admin /Password-admin.
5-Setup wizard will guide you through setup.
In this scenario you may need to reset the extender and configure it again.
:-Plug in your extender into power socket.
:-Look at the back of your extender there would be a little reset button.
:-Use a paperclip or any sharp object .
:-Press and hold it until power light starts blinking.
:-Wait you’re extender will reboot when you see power light turns solid.
:-Connect your computer with extender.
:-Launch any internet browser using interface https://tplinkrepeater.net or you can access the setup by typing the ip address of your extender that would be 192.168.0.250/192.168.0.254 in the address url bar. And hit enter.
:-Extender setup page will appear on your browser.
:-Follow the instructions and configure your extender setting.
:-Once its successfully configured you can try access the netflix.
If problem still persist call us at 1-800-603-4024 and get additional help from expertise.
1. Try to reset your extender and that will fix the problem for sure.
2. Configure the extender and try to use Netflix.
3. If still you face any issues call us at 1-800-603-4024.
In order to configure the range extender you need to follow the instructions below:
> plug in your extender near to the router for the initial setup within 10 feets
> Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
> Once you see the light stopped flashing on the extender it means the extender is setup now
Step 2
> Connect your computer wireless to the extended network
> pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
> You will get through a login window default username: admin and the Password : admin
> click on quick setup and Continue , Follow the instructions to complete the setup