0
ELTON WIGGINS
i am trying to set up my extender but its not working ....
0 Subscribers
Submit Answer
0 Answers
There are several ways to configure your Tp Link TL-WA860re extender i.e ethernet cable method ,wps method and many more but i am sharing wps method here for wps method you need to follow these steps:-
1. connect your extender in a direct wall socket near by your router for setup.
2. press wps button on your extender for 3-5 seconds.
3. press wps button on your router (you can do it by accessing router main page also).
4. it will be connected to your routers network.
5. you will see your network name with ext affixed in it.
6. connect to the same network .
7. it will open a setup wizard for you.
8. follow the on screen instructions and you are good to go now.
(if problem still persists you can reset your device.)
for any question & query feel free to call us on 1-800-603-4024
Tp-link Extender setup:-
Plug in your extender into wall socket
Power light turns solid
Connect your computer with extender hard wired or wirelessly
Launch any internet browser using interface http://www.tplinkrepeater.net
It will bring up a extender setup page
Follow the instructions and configure extender settings
Once its successfully configured you can connect your devices with extended network
If problem still persist call us at 1-800-603-4024 and get more assistance from expertise.
Plug in your extender into the wall socket near by your router.
Now wait till the light on your extender is solid amber.
Now press the WPS button on your extender and router for 3 seconds at the same time .
All lights on your extender are blinking .
Once the light on your extender is solid green your extender is connected to the router.
Now open the browser and type in the address bar https;//tplinkrepeater.net
Now your extender is set up and you can place it top the different place if needed.
Connect any device with it and use the extended network
If need any assistance call us at 1800-603-4024
1. Plug the extender to wall outlet.
2.Power light should lit up as solid green or blue.
3.Connect the extender with wire to the computer.
4.Launch http://www.tplinkrepeater.net
5. It will show the extender page, start setting up the extender and you can choose the existing wireless network settings to configure your extender.
6. Once done you can start connecting your devices to the extender and they will work fine.
In order to configure the range extender you need to follow the instructions below:
> plug in your extender near to the router for the initial setup within 10 feets
> Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
> Once you see the light stopped flashing on the extender it means the extender is setup now
Step 2
> Connect your computer wireless to the extended network
> pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
> You will get through a login window default username: admin and the Password : admin
> click on quick setup and Continue , Follow the instructions to complete the setup