Leave a reply

3 comments
  • Follow these steps-

    1.Power cycle your router first.
    2.Change the channel for 2.4 to 11 and for 5G to 153.
    3.MAC cloning is the best solution for it .
    4.Consult your ISP and do a line check.
    5.Check if there is any firmware update for router.
    6.Reset the router and setup it again .

  • As your linksys ea 6400 disconnects automatically after few minutes kindly follow these steps:-
    1.Reboot the cable modem.
    2.Reboot the lnksys router.
    3.Update the firmware of your router.
    4.Verify if signal is strong through the cable modem.
    5.Disable WPS within the router admin (Advanced Settings > Wireless > Wi-Fi Protected Setup).
    6.Change the ‘Channel’ for 2.4Ghz from Auto to Channel 1 within the router admin (Advanced Settings > Wireless > Wireless Setup)
    7.Clone the ‘MAC Address’ by clicking on the “Clone Your Computer’s MAC Address” button within the router admin (Advanced Settings > WAN > Internet Setup).
    at last you can try this step:-
    8.Go to Advanced Settings > LAN > Host and LAN Settings Change “Enable DNS Proxy” to Off Save.
    your issue will be fixed with these steps if not just reset the router and re configure it.
    for any help feel free to call us on 1-800-603-4024.

  • 1. Reset your router.
    2. Check for the latest firmware software
    3. Change the Channel and choose any 1,6,11
    4. Try to place the router in higher location from where you can get good signal strenth

Written by SHANON
Router Categories