0
JOHN HOLTER
how do I connect my archer c7Â router with my devices through wifi?
0 Subscribers
Submit Answer
0 Answers
To setup your Tp link Archer C7 router you need to follow these steps:-
You need to plug in a cable from your existing modem to internet port of your router.
after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
1. Press windows + R key that will open run window for you.
2. Type CMD in the run box.
3. Open Ipconfig and check network statistics.
4. Open your default gateway in any browser.
5. Type your user name and password .
6. that will open a setup wizard for you so follow the steps and you are good to go.
7. while following the setup wizard kindly make sure the settings you are choosing is correct
i.e time zone and wireless network name and key.
8. kindly upgrade the router firmware as well if there is any update pending over there.
if problem still persists you can reset your router and follow the same steps.
For any help feel free to call us back on 1-800-603-4024.
First of all make sure all the connections have been done between your modem and router .
Now connect the cable from your router’s port no 4 to the computer directly.
Now open the browser and enter the default ip address in the browser I.E 192.168.1.1
Enter the default username and password written on your tp link router.
Now it will open the set up wizard for you and go according to the instructions.
Once set up is complete you can connect your devices with the wireless connection of your router.
If need any help you can reach us at 1800-603-4024
In order to setup your tplink router follow the steps given below:
> Connect a cable from your modem’s LAN port to the internet port of the router
> Connect your computer wireless to the routers default SSID or via Ethernet cable
> Pull up a browser and at the top on the address bar type in 192.168.0.1 and hit enter
> you will come through your router login screen default username : admin and Password : admin
> setup page will come up , Follow the instruction to complete the setup
Note : It should be Dynamic Ip and do not clone the MAC of the computer.