How to update the firmware of Belkin N300?

3 comments

• If your extender is working fine then simply connect your device to extender network .

  1.Once connected open your browser and type in http://belkin.range .
  2.Login into your extender first .
  3.Look for utilities .
  4.Under utilities check firmware update .
  5.If there is any firmware update available it will let you know .

  Reply

• Open the browser and enter the default ip address of your extender i.e 192.168.1.254.
  Now login to your extender by entering username and password
  Look for the utilities and under that you will find firmware
  Now check online for available firmware version and update the firmware if available .
  Now your extender reboots itself and you are ready to go now
  Still need any assistance give us call at 1800-603-4024

  Reply

• To update the firmware of your Belkin N300 router you need to follow these steps:-
  1. Press windows + R key that will open run window for you.
  2. Type CMD in the run box.
  3. Open Ipconfig and check network statistics.
  4. Open your default gateway in any browser.
  5. Type your user name and password .
  6. now you are on router main page .
  7. you need to go to advanced tab and then administration there you will find upgrade of your
  router.
  8. click on update it will take 2-3 minutes and it will reboot your router automatically after
  updation.
  now your firmware of router has been successfully updated.
  you are good to go now. for any help feel free to call us on 1-800-603-4024.

  Reply