0
Pamela Hunter
how do I connect my EA7500 router , so I can connect my devices through wifi
0 Subscribers
Submit Answer
0 Answers
To install your router:-
1. Power on your new router.
2. Connect the Internet cable from your modem to the yellow Internet port
on your router. Wait until the power light on the front of the router is
solid.
3.Connect your computer to router
4. Open a web browser and follow the instructions to complete your
router’s setup. If instructions do not appear in the web browser, enter
linksyssmartwifi.com in the browser’s address bar.
5. At the end of setup, follow the on-screen instructions to set up your
Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to easily manage
your router’s settings, such as:
• Change your router’s name and password
• Set up guest access
• Configure parental controls
• Connect devices to your network
• Test your Internet connection speed
If problem is still persist dial 1-800-603-4024 and get additional help from expertise..
LINKSYS ROUTER SETUP –
1.PULG IN THE LINKSYS TO THE WALL OUTLET.
2.WAIT FOR THE LIGHTS TO TURN SOLID ON YOUR ROUTER.
3.NOW MAKE SURE YOUR MODEM IS CONNECTED TO THE LINKSYS ROUTER WITH AN ETHERNET CABLE GOING TO THE INTERNET SLOT OF THE ROUTER.
5.ONCE THE DEVICE IS CONNECTED,OPEN YOUR BROWSER AND OPEN THIS WEBSITE http://www.linksyssmartwifi.com or 192.168.1.1
6.ONCE THE ROUTER IS SETUP USE THE SSID AND PASSWORD TO CONNECT OTHER DEVICES OR CHANGE THE NAME AND SSID IN THE ROUTER PAGE.
Check the attachment for cable connection with your device-
1.Once you connect your device simply boot your router.Make sure you are using wall socket.
2.On your computer open your browser and type http://linksyssmartwifi.com or check the router IP by opening Command prompt and type IPCONFIG .Check the default gateway and use that IP in your browser in case smart wifi website doesn’t work.
3.Setup wizard will appear and follow the steps to complete the configuration .
4.Once your connected you can remove the cable from the computer and router .
5.Now on your device got to wireless setting and look for your wireless name and connect to it .
To setup your Linksys EA7500 router you need to follow these steps:-
You need to plug in a cable from your existing modem to internet port of your router.
after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
1. Press windows + R key that will open run window for you.
2. Type CMD in the run box.
3. Open Ipconfig and check network statistics.
4. Open your default gateway in any browser.
5. Type your user name and password .
6. that will open a setup wizard for you so follow the steps and you are good to go.
7. while following the setup wizard kindly make sure the settings you are choosing is correct
i.e time zone and wireless network name and key.
8. kindly upgrade the router firmware as well if there is any update pending over there.
if problem still persists you can reset your router and follow the same steps.
For any help feel free to call us back on 1-800-603-4024.