0
Carol Sullivan
What does it mean ?
0 Subscribers
Submit Answer
0 Answers
To resolve amber or blinking power led issues:-
:-Turn off the router and then turn it back on to see if the power led turns green or white.
:-Press and hold the reset button to restore the router to its factory settings.
:-If the power light is still blinking than connect your computer to the lan port of the router.
:-Set your computer IP address, Subnet Mask, and Default Gateway to static.
:-After setting your computer IP address to static, open your command prompt.
:-Type ping 192.168.1.1, then hit enter.
:-If it is getting replies than reinstall the firmware of router.
:-Set your computer configuration back to obtain an ip address automatically.
If problem still persist than call us at 1-800-603-4024 and get additional help from expertise.
Blinking power light means its either software or hardware issue.
Try these steps-
1.Make sure your router is not plugged into surge protector because the router works best plugged in to the wall outlet.
2.Try resetting the router by using a paperclip and keep it in for 30 seconds then take it out,if this doesn’t work then try next step.
3.This time hold the paperclip in for 45 seconds for hard reset.
4.Now if above steps don’t work Please call us at 1-800-603-4024 so that we can try installing firmware manually or go for replacement if its in warranty.
if powerlight is blinking on your netgear r6220 please power cycle your router first then please make sure that your router should be connected directly to a wall socket(no surge protector or extension cord).if problem still persists just reset your router with the help of a paper clip and re setup router.
To setup your Netgear r 6220 router you need to follow these steps:-
You need to plug in a cable from your existing modem to internet port of your router.
after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
1. Press windows + R key that will open run window for you.
2. Type CMD in the run box.
3. Open Ipconfig and check network statistics.
4. Open your default gateway in any browser.
5. Type your user name and password .
6. that will open a setup wizard for you so follow the steps and you are good to go.
7. while following the setup wizard kindly make sure the settings you are choosing is correct
i.e time zone and wireless network name and key.
8. kindly upgrade the router firmware as well if there is any update pending over there.
if problem still persists you can reset your router and follow the same steps.
For any help feel free to call us back on 1-800-603-4024.