0
rick Jagels
How to enable guest ssid ?
0 Subscribers
Submit Answer
1 Answers
Best Answer
0
plug in the extender into the wall socket at least 5-10 feet away from your main router for the initial setup.
now connect any wireless device like computer or laptop with the extender WIFI and then open the browser
In the long address bar of your browser type the IP address of your extender it will take you to the extender setup page.
now just follow the instructions and setup the password for the extender WIFI.
Save the settings and plug in the extender between the router and the dead spots of your home.
Replying as
Submit
1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
3. PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE ALSO).
4. IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
5. YOU WILL SE YOUR NETWORK NAME WITH EXT .
6. CONNECT TO THE SAME NETWORK .
7. IT WILL OPEN A SETUP WIZARD FOR YOU.
8. FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
(IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE OR CALL US AT 1800-603-4024
:-Connect your router using an Ethernet cable to any available Ethernet ports of your EX7300.
:-Use your Wi-Fi network manager on your wireless computer or any Wi-Fi device to connect to the NETGEAR_EXT network.
:-Once connected, the Device to Extender LED will turn to solid green.
:-Open your internet browser such as Internet Explorer, Mozilla Firefox, or Google Chrome.
:-Enter http://www.mywifiext.net in the address bar of your internet browser.
:-Click NEW EXTENDER SETUP.
:-Complete the extender setup screen and click next.
:-Click Access Point and the setup is now going to check for an internet connection.
:-Set the network name (SSID), security option, and passphrase (network key). Click Next.
:-After applying the settings, connect your devices wired or wirelessly to the EX7000’s new SSID and click Continue.
:-Click Next to finish the setup.
There are several ways to connect your Netgear ext 7300 extender i.e ethernet cable method ,wps method and many more but i am sharing wps method here for wps method you need to follow these steps:-
1. connect your extender in a direct wall socket near by your router for setup.
2. press wps button on your extender for 3-5 seconds.
3. press wps button on your router (you can do it by accessing router main page also).
4. it will be connected to your routers network.
5. you will see your network name with ext affixed in it.
6. connect to the same network .
7. it will open a setup wizard for you.
8. follow the on screen instructions and you are good to go now.
9. you can Login to the web user interface of your netgear WiFi Extender using
http://myWiFiext.net but the device should be connected to extender network.
(if problem still persists you can reset your device.)
for any question & query feel free to call us on 1-800-603-4024