How to connect tplink CPE210 device as a repeater with the att router?

In order to setup CPE210 as a Repeater Mode, we need to follow some steps which are shown below:-

1. First of all, we have to provide a static Ip address to the computer and for that
   • Press window+R button
   • Now Run box will open and in that box type “ncpa.cpl” (without quotes)
   • It will open a Network Connections window
   • After that Right Click on the Ethernet(Local Area Connection) Adapter and go to the Properties option
   • Now Highlight the “Internet Protocol Version 4(TCP/IPv4)” option and click on the Properties again
   • Select “use the following IP address” and type the information as shown below:-

   IPv4 Address:- 192.168.0.10

   Subnet mask:- 255.255.255.0

   And then save the settings.

2. Now connect an Ethernet cable between your PoE Adapter and the CPE210(cable should be connected to the PoE port on both the ends) and after that connect another cable between PoE adapter(LAN Port) and the computer.
3. Open your browser on the computer and type this address:- 192.168.0.254
4. it will take you to the CPE210 Pharos setup page and over there, create your login password and hit next.
5. Now Select repeater mode and hit next
6. After that follow the instructions on the screen and complete the setup.

follow these steps:

plug in the CPE into the wall socket and then wait till the power light is solid (nearby the router for the initial setup

connect any laptop or computer with the extender network and then open the browser in it and in the URL bar(Long address bar ) of the browser type 192.168.0.254 and it will open the setup page

change the mode to the repeater mode and set up the password.

save the settings and then you are good to go.

plug in the CPE into the wall socket and then wait till the power light is solid

(plug it int at least 5-10 feet from the router for the initial setup)

connect any laptop or computer with the extender network and then open the browser in it and in the URL bar of the browser type 192.168.0.254 and it will open the setup page

change the mode to the repeater mode and set up the password.

save the settings and then you are good to go