How do i reconfigure my Amped RE2600M extender without resetting it?
In order to reconfigure the amped extender please follow the instructions below:
The first thing that you need to do is reset the extender back to factory defaults, for that you would need to first press and hold the reset button down for 30 seconds.
Once the extender has been reset back to factory default. Connect your extender to the computer and then pull up a browser and at the top of the address bar type in 192.168.1.240 and then hit enter.
You will be directed to the setup screen of your amped extender follow the instructions and complete the setup.
The easiest way to reconfigure Amped RE2600M extender without resetting it, u need to follow these steps:-
- Connect the extender to the router using an Ethernet cable .
- Open any browser and type on the top address bar :- 192.168.1.240
- You will see the Amped setup wizard .
- Click on start scan to scan all available WiFi networks .
- Click on your WiFi network that you want to extend and then enter the WiFi password.
- Then follow the instructions on the screen and complete the setup process.
if u face any difficulty in that do let us know so that we can help u futher.....
In order to do that follow these steps:
- First you need to login your router settings
- once you are logged in, then check the IP address for your Amped extender under the connected devices list.
- Once you get the IP address, then type that IP address on your web browser
- After that, it will open the Amped extender’s web interface.
- Now you can reconfigure your Amped extender again.
To reconfigure my Amped RE2600M extender without resetting it follow these steps:-
- Connect the extender to the router using an ethernet cable .
- Open any browser and type on the top address bar :- 192.168.1.240
- You will see the amped setup wizard .
- Click on start scan to scan all available wifi networks .
- Click on your wifi network that you want to extend and then enter the wifi password.
- Then follow the instructions on the screen and complete the setup process.
In order to do that follow below-mentioned steps:
- Connect any one of your devices to the Extender's network or you can also connect your computer and extender with the Ethernet cable.
- Open the web browser and at the long address bar you need to type http://192.168.1.240 or http://setup.ampedwireless.com then you will get the dashboard of the amped extender.
- Now you need to click on scan and after that follow the onscreen instructions.
- After completing the setup try to connect any one of your devices to the extended network so that we can make sure that the internet is working fine through the extender also make sure that the extender got reconfigured properly.
*If you face any kind of difficulty while doing the setup do let us know so that we can help you accordingly.
Connect the extender into the wall socket within 5-10 feet away from the main router for the initial setup
now connect any wireless device like a laptop or computer to the extender network and then open the browser.
in the long address bar of your browser type the IP address, will take you to the setup wizard page follow the instructions over there and set up the password and save the settings.
now you can take the extender at the place between the dead spots and the router.
To reconfigure my Amped RE2600M extender without resetting it , first we need to connect the extender to the router using an ethernet cable. Now open 192.168.1.240 on the browser. You will see the amped setup wizard. Click on start scan to scan all available wifi networks nearby.. Now select the network that you want to extend and enter the credentials.Follow the instructions to complete the setup process.
If you are connecting your Amped extender with a new router then follow these steps:-
- Connect an Ethernet cable between your Amped extender and the computer
- open your browser and type this address:- 192.168.1.240
- It will take you to Amped setup page
- now you can click on the scan button and then it will search for the wifi networks
- From there, you can select your new router's wifi network and then follow the instructions on the screen and complete the setup process.
If you are trying to connect your extender with the same router then follow these steps:-
- Login into your main router's settings
- once you are logged in, then check the IP address for your Amped extender under the connected devices list.
- Once you get the IP address, then type that IP address on your web browser
- After that, it will open the Amped extender's web interface.
- Now you can reconfigure your Amped extender again.