How to configured Tplink TL-WR902AC Travel Router as a Access point mode with the Virgin media Router?

To configure Tplink TL-WR902AC travel router as a access point mode with the virgin media router , first turn on the router . Now connect the virgin router and TP link router with an ethernet cable. Now to configure Tplink as an access point, you will have to toggle the switch on the Tplink set to the AP/Ext mode . Now connect the computer with TP link router's network. Open 192.168.0.1 on the browser.You will see the setup page there . Follow the instructions to finish the set up.

1. Turn on your Tplink travel router
2. connect an Ethernet cable between your Tplink and the virgin media router
3. And in order to configure Tplink as an Access Point, make sure the toggle switch on the Tplink set to the AP/Ext mode
4. After that connect your computer with the Tplink router's network
5. open your web browser and type this address:- 192.168.0.1
6. It will take you to the setup page
7. Now you just need to follow the instructions on the screen and complete the setup.

plug in the extender into the wall socket near to your router for the initial setup

now connect any wireless device with the extender connection and then open the browser on the device and then in the long address bar of your browser type the IP address and it will take you to the setup wizard page over there change the mode from repeater to the Access point and then set up the security password and save settings.

now it will take a few seconds to reboot after all the lights get solid which means the extender is configured.