0
router2017
I M TRYING TO USE MY EXTENDER WIRELESS NETWORK ,BUT IT IS SHOWING ME THAT IT IS CONNECTED BUT NO INTERNET AND I AM NOT ABLE TO GO ONLINE ON ANY DEVICE.
0 Subscribers
Submit Answer
0 Answers
AS YOU TOLD THAT YOU ARE CONNECTED WITH EXTENDER NETWORK HOWEVER THERE IS NO INTERNET IN THIS CASE JUST RESET YOUR EXTENDER WITH A PAPER CLIP AND FOLLOW THESE STEPS.
TO CONNECT YOUR LINKSYS RE 4100 EXTENDER YOU NEED TO FOLLOW THESE STEPS:-
1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
3.PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE ALSO).
4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
5.YOU WILL SE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
6.CONNECT TO THE SAME NETWORK .
7. IT WILL OPEN A SETUP WIZARD FOR YOU.
8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
(IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024.
follow the steps on to set up the extender again –
Re-4100 Linksys extender guide-
1.you need to plug in the extender and connect a wifi enabled device on extenders wifi.
2.Now open your browser and type in the address bar http://extender.linksys.com/ .
3.follow the instructions on the screen.
4.Once the setup is done move the extender to your desired location.
Here are some instructions through which you can configure extender:-
:-Plug in the extender direct to the walljack..
:-Once all the lights are on..
:-Clcik on wifi icon on computer ..
:- It would be at the right bottom side on windows computer..
:-It would be at upper right corner on mac computer..
:-Click on linksys extender..
:-Hit connect ..
:-Open any internet browser on computer..
:-Type 192.168.1.1 or extender.linksys.com..
:-Setup wizard will open..
:-Follow the instructions..
:-Once its configured ..
:-You can connect your devices with extender and you will able to get good internet speed..
:-If you still facing any problem ..
:-You can dial 1-800-603-4024 and can get additional help from expertise..
First you need to reset the extender by holding the reset pinhole for 30 seconds.
1-Use power socket for extender .
2-Wait for 1-2 Minutes .
3.Press WPS button on the extender for 5 seconds.Then press WPS on the router for 3 seconds.
4.Wait until you see the blinking LED solid .
5.Now check there will be a name just like your host network but with EXT .
6.Simply connect to that network by using your default password for host network .
7.Once you are connected open your browser and type http://extender.linksys.com .
8.Take a look on the dashboard that its showing you connected or not if not then try this-
Hit site survey on the page and manually select your network for extender.Follow the steps and complete the setup.