In order to access the wireless settings of the Asus router, the user needs to configure the control panel of the Asus router. Here, you can explore and modify various advanced settings like altering the username and password, performing the firmware updates etc. But first, you need to perform some series of steps to login into the Asus router web-management page. Go through the information given below to gain insights on the Asus router login process.
Asus wireless router settings page login (Blue GUI)
- Start by connecting the router’s LAN port to the PC’s LAN port with an Ethernet cable.
- Type in the default IP address of the router in the browser and hit enter.
- After that, you can input the username and password on the login page. An important point to note here is that the default login credentials used to login to the router settings page are different from the SSID and password used to connect wirelessly.
- Once you log in successfully, you will notice that the control panel for the router settings opens up.
How to login the Asus router(Web GUI)
When you log in to the Web GUI for the first time, you are automatically directed to the Quick Setup page. Have a look at the following steps to log into the Web GUI of the router:
- Ensure that the router is powered on before logging in and the LED light is on. It should be stable as well. Also, connect the computer to the router either in a wired or wireless manner.
- Now, type in the LAN IP address of the router in the browser. You can also input the default gateway router.asus.com in the address bar of the browser and press enter.
- Key in the default username and the password on the login page. They both are ‘admin’.
- You can now configure the Web GUI to access the wireless settings of the Asus wireless router.
How to set up the Asus router to access the Web GUI from WAN?
The Web Access from WAN allows configuring the wireless router via the internet. For this follow the steps given below:
- Start with opening any compatible browser and navigate to the Web GUI via the default gateway router.asus.com.
- Input the default login username as well as the password once the login window appears and click Sign In.
- Now go to the Administration and choose System.
- After that, select Remote Access Config.
- Choose the YES option to enable Web Acces from WAN. When you are accessing the web GUI from WAN, only HTTPS is supported. You can use the default setting “8443” of (HTTPS port of Web Access from WAN).
- Click on Apply to save the configuration made.
How to access the Web GUI from the Internet (WAN)?
- The default port is 8443 and you can use https://[WANIP]:8443 or https://[DDNS name]:8443 to launch the web user interface of the wireless router.
- Next, check the Network Map and then the Internet status: DDNS name.
- You can navigate to Web GUI https//wltest2020.asuscomm.com:8443. Just input the default login credentials on the login page and click Sign In.
- You can use the Web GUI to configure the wireless settings of the Asus router.
How can you change the Router wireless password?
It is advised to use “WPS2-Personal” for the authentication method and ‘AES’ for WPA encryption. In order to change the router wireless password, follow the steps given below:
- Connect the computer or device to the router followed by launching any compatible browser on your device.
- Input the default gateway http://router.asus.com in the address bar to enter the router login page and press enter.
- You can input the login username and password on the login page and just click Sign In.
- Now go to the Wireless option and select General. Fill in the password you wish to use at the WPA Pre-Shared Key. Just click on Apply to make changes and complete the settings.
Failing to login to Asus router? Here is how you can do it
- Ensure that the router has a correct WAN connection.
- The adapter must be set to obtain IP automatically.
- The web browser should not set up a proxy server. For this go to the Internet Explorer option and click Internet Options on the Tools menu.
- Click on the LAN settings on the Connections tab and make the required changes and press OK.
- You can try to use Device Discovery to find the wireless router.
Other troubleshooting tips for failed Asus router login
- The adapters and cables must be connected properly to the router.
- Also, ensure that the LED indicators are functioning correctly.
- You can connect the device to the internet using an Ethernet cable. If your device fails to access the internet, lookup for the information provided by the ISP.
- Always upgrade the firmware to the latest version if you notice any visible updates.
- Verify if the login credentials you used to login to Asus router are correct. Remove the piled up caches and cookies including the history that your browser has stored to make it run efficiently.
- In case of any issues with the internet connection, check the network connection with your internet service provider.
Conclusion
To know more about the Asus router login process, get in touch with our tech guys at the end. They will provide you with a piece of expert advice on this topic.