Answers ( 3 )

  1. Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    In order to setup your wicommfi range extender device as a repeater, Please follow the steps below:
    > Plug your extender near to the router for the initial setup
    > Connect your computer to the open wifi of your wicommfi extender
    > pull up a browser and at the very top on the address bar type in 192.168.10.1 and hit Enter
    > Login screen will come up default username: admin and Password : admin click on login
    > Click on repeater mode > choose your existing network > enter your wireless password for the existing wifi
    > wait and the setup is complete
    > put the extender to the new location where you want it and connect your devices to it.

    (0)(0)
  2. Paul Grey

    Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    You can use the Wicommfi as a extender, repeater and as a Access point
    Step 1. First of all you need to plug your extender near to the router
    Step 2. Go to the wifi settings on the computer and select the wicommfi extender name
    Step 3. OPen the browser and type it on the address bar 192.168.10.1 and hit enter
    Step 4. Now you can see Login screen appear up on the screen: admin and password
    Step 5. Click on repeater mode then choose your existing network name and then enter your
    wireless password for the existing wifi
    Step 6. Now you can see it is rebooting , wait for the setup is completed
    Step 7 . Now you can put the extender where you want to placed in the house and you can
    connect the devices

    (0)(0)
  3. Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    To Setup Range Extender You Need To Follow These Steps
    WicommFi extender is one of the best extenders available in the market. Extenders as the name say these are used for the extension of wireless range of an existing router. This is the only extender that can be used as a router, repeater or access point. You can switch the mode and set it up as you need. We are providing here the steps for the setup of this wireless range extender as a repeater, as a router and as an access point respectively. This extender is loaded with features such as WPS setup as well as QR code easy setup, transmission speed of 750 Mbps, signal across walls etc.
    =============================================
    How to setup WicommFi wireless range extender?
    =============================================
    Connect to its open wireless network. (2.4G_WICOMMFI / 5G WICOMMFI).
    Open your browser and type in the address bar 192.168.10.1 and hit enterby using your keyboard.
    Use admin for both user name & password.
    Choose Repeater mode on the dashboard.
    Choose the network you want to connect to.
    Type the name you need and selected host network password
    Hit connect and wait for few seconds.
    After few seconds, you will be able to access the internet by connecting to the extender’s network.
    =========================================
    How to setup WicommFi extender as a router?
    =========================================
    To setup you need to connect an Ethernet cable from modem or wall to WicommFi extender.
    Connect to its open wireless network. (2.4G_WICOMMFI / 5G WICOMMFI).
    Open your browser and type in the address bar 192.168.10.1 and hit enterby using your keyboard.
    Use admin for both user name & password.
    Choose Router mode on the dashboard.
    Select your internet type. You can ask your ISP about it. You have a choice to select for Static/Dynamic/PPPoE. Put the name and password you need for the router.
    Put the name and password you need for the router. Select encryption type also.
    Hit apply and wait for few seconds.
    Restart your modem and extender before using.
    ===============================================
    How to setup WicommFi extender as an access point?
    ===============================================
    To setup an access point you need to connect an Ethernet cable router to extender.
    Connect to its open wireless network. (2.4G_WICOMMFI /5G WICOMMFI).
    Open your browser and type in the address bar 192.168.10.1 and hit enter by using your keyboard.
    Use admin for both user name & password.
    On the dashboard choose AP mode.
    Type the name, select encryption and put the password you need.
    Hit apply and wait for few seconds.
    Restart the device and start using it.
    Follow the steps given above for each setup. It depends on the user, in which mode he wants to set it up. For any trouble related to this wireless range extender, our tech team is available 24/7.

    (0)(0)

Leave an answer

Browse

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>