Answers ( 6 )

  1. Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    To Setup Your Linksys Extender You Need to Connect Pc/Laptop With Linksys Extender Wifi.
    Then Open Your Browser and Type extender.linksys.com.There will be a setup page appear You Just Need To Follow the Instructions and Easily Finish the Setup Process.

    (0)(0)
  2. Roger High

    Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    First plug in the extender into the power outlet and wait till the light turns orange.
    Then using a wireless PC or a tablet look for the WiFi name of your extender (linksys extender setup)
    Then you can open a web browser and type the website(extender.linksys.com) or 192.168.1.1
    It will open the setup page click on the manual setup and enter the default password (admin)
    Make all the changes like network name ssid and password for both 2.4g and 5g.
    click on Save to make changes and your extender is good to go.

    Thank-you.

    (1)(0)
  3. Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    #To setup your LINKSYS extender kindly follow these steps:-
    -Plug in your extender in to the wall socket
    -Press the reset button/Pin hole on your extender for 10 seconds .
    -Wait Till the time all lights on you extender are back again.
    -Now you can connect your computer with the extended network.
    -Once connected with network open the Default IP of your extender i.e 192.168.1.1
    -Now follow the steps and set up your extender with the existing network
    -Once configured You can took your extender to the place where you would like to use it
    -Connect your devices with the extended network .
    -Still facing any issues you can call us at 1800-810-8012 and ask for help.

    (1)(0)
  4. Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    You can follow these steps to setup your Linksys RE6350 Range Extender:-
    >Place the Linksys range extender nearby to your home router and power it on for the initial setup.
    >Press the WPS button on your extender and hold it down for 3-5 seconds.
    >Within the 1-minute press WPS button on your home router.
    >Wait for the extender lights get stable and now try to connect any of your wireless devices with the extended network.
    *If you want to connect your range extender with 5GHz network then repeat the same steps once again.

    (0)(0)
  5. Paul Grey

    Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    Step 1: Plug the Linksys RE6350 into a power outlet and wait for the light indicator to turn orange.
    Step 2: Connect to the range extender’s default WiFi name, Linksys Extender Setup.
    Step 3: Enter "http://extender.linksys.com" or "192.168.1.1" in a supported browser's Address bar and press [ENTER] to launch
    the setup.
    Step 4: Click the Manual Setup link.
    Step 5: Enter the default Password which is admin and click Login.
    Step 6: Configure your manual settings such as the wireless Network Name (SSID) and password for both 2.4 GHz and 5 GHz
    networks
    Step 7: Click Save to apply changes.

    (0)(0)
  6. Timothy.Brown

    Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    In order to set up the RE6350 Range extender you would need to follow the following steps:
    Step 1
    > First connect your computer wireless or wired to the range extender
    > login to extender.linksys.com or 192.168.1.1
    > initiate the setup.
    Step 2
    > Press the WPS button on the router first for 3 seconds and then on the extender for 3 seconds once the light on the extender stops blinking the setup is complete.

    (0)(0)

Leave an answer

Browse

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>