Answers ( 4 )

  1. Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    You can follow these steps to setup your Linksys EA6350 router:-
    *If You made any kind of changes press the reset button of the router for 30 seconds while it's powered on.
    >Now you need to wait for the router lights to get stable.
    >Once the lights get stable connect any one of your wireless or wired devices with your router and do the setup process again by following the instructions given in steps.
    >After completion of setup reboot your router and then after the lights get stable try to go online so that we come to know router setup done correctly.
    >Once router lights get solid connect your devices to the router network and try to go online so that we can check that setup done successfully.
    If you still face any issues, do write us back so that we can help you with that.

    (0)(0)
  2. Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    To install your router:
    1. If replacing an existing router, disconnect it. Power on your new router.
    2. Connect the Internet cable from your modem to the yellow Internet port
    on your router. Wait until the power light on the front of the router is
    solid.
    3. Connect to the secure wireless name shown in the Quick Start Guide that
    came with your router. (You can change the network name and password
    later during router setup.) If you need help connecting to the network,
    refer to your device documentation CD. Note: You will not have Internet
    access until the router setup is complete.
    4. Open a web browser and follow the instructions to complete your
    router’s setup. If instructions do not appear in the web browser, enter
    linksyssmartwifi.com in the browser’s address bar.
    5. At the end of setup, follow the on-screen instructions to set up your
    Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to easily manage
    your router’s settings, such as:
    • Change your router’s name and password
    • Set up guest access
    • Configure parental controls
    • Connect devices to your network
    • Test your Internet connection speed
    NOTE:
    As part of Linksys Smart Wi-Fi account setup, you will be sent
    a verification e-mail. Make sure that you open the e-mail from
    Linksys and click the provided link.
    • Indicator light—Stays on steadily while power is connected and
    following a successful Wi-Fi Protected Setup connection. Blinks or
    pulses slowly during bootup, during firmware upgrades, and during a
    WiFi Protected Setup connection. Blinks quickly when there is a WiFi
    Protected Setup error.
    Back view
    • Adjustable Antennas— The included two external antennas are
    adjustable for best performance.
    NOTE
    For best performance, position the side antennas vertically at a 90˚
    angle as shown in the picture on the left.
    • Wi-Fi Protected Setup™ button—Press to easily configure wireless
    security on Wi-Fi Protected Setup-enabled network devices.
    • USB ports—Connect and share a USB drive or a USB printer
    • Ethernet ports—Connect Ethernet cables to the blue gigabit
    (10/100/1000) ports and to wired Ethernet network devices.
    NOTE
    For best performance, use CAT5E or higher rated cables on the
    Ethernet ports.
    How to connect to Linksys Smart Wi-Fi
    You can use Linksys Smart Wi-Fi to configure your router from any computer
    that has an Internet connection.
    To open Linksys Smart Wi-Fi:
    1. Click the Linksys Smart Wi-Fi icon on your desktop.
    - OR -
    Open a web browser and go to www.linksyssmartwifi.com.
    2. Enter the e-mail address and password you set up earlier and click Log in.
    How to change router settings
    Use Linksys Smart Wi-Fi to change settings on your router and set up special
    features such as parental controls and guest access.
    NOTE:
    For additional help on any menu, click Help at the top of the
    screen.
    To change router settings:
    1. Open Linksys Smart Wi-Fi and log into your account.
    2. In the menu on the left, click an option:
    • Device List lets you display and manage all network devices connected
    to your router. You can view devices on your main network and your
    guest network, disconnect the devices, or display information about
    eac
    5
    Linksys EA-Series Setting Up Your EA-Series Router
    • Guest Access lets you configure a network so guests can access the
    Internet, but not all of your network resources.
    • Parental Controls let you block web sites and set Internet access
    times.
    • Media Prioritization lets you set which devices and applications have
    top priority for your network traffic.
    • Speed Test lets you test your network’s Internet connection speed.
    6
    Linksys EA-Series Setting Up Your EA-Series Router
    • USB Storage lets you access an attached USB drive (not included) and
    set up file sharing, a media server, and FTP access. (Available only on
    routers with USB ports.)
    • Connectivity lets you configure basic and advanced network settings.
    • Troubleshooting lets you diagnose problems with your router and
    check the status of the network.
    • Wireless lets you configure your router’s wireless network. You can
    change the security mode, password, MAC filtering, and connect
    devices using Wi-Fi Protected Setup™.
    7
    Linksys EA-Series Setting Up Your EA-Series Router
    • Security lets you configure your router’s wireless security. You
    can set up the firewall, VPN settings, and make custom settings for
    applications and games.
    8
    Linksys EA-Series Troubleshooting
    This chapter can help you solve common setup issues and connect to the
    Internet. You can find more help from our award-winning customer support at
    linksys.com/support.
    Your router was not successfully set up
    If Linksys Smart Wi-Fi did not complete the setup, you can try the
    following:
    • Press and hold the Reset button on your router with a paperclip or pin
    until the LED starts blinking (about 10 seconds), then install the router
    again.
    Your router’s appearance may vary
    • Temporarily disable your computer’s firewall (see the security software’s
    instructions for help), and install the router again.
    • If you have another computer, use that computer to install the router
    again.
    Windows XP Service Pack update
    On Windows XP computers, Linksys Smart Wi-Fi requires Service Pack 3. If the
    currently installed Service Pack is older than version 3, you need to download
    and install Service Pack 3.
    TIP
    To temporarily connect to the Internet and download the required
    Service Pack, you can use the included Ethernet cable to connect
    your computer directly to your modem.
    To install Service Pack 3:
    1. Connect to the Microsoft Update website (update.microsoft.com/
    windowsupdate).
    2. Follow the instructions on the website or contact Microsoft if you need
    further help.
    3. After downloading and installing Service Pack 3, install the router again.
    Troubleshooting
    9
    Linksys EA-Series Troubleshooting
    Your Internet cable is not plugged in
    message
    If you get a “Your Internet cable is not plugged in” message when trying to set
    up your router, follow these troubleshooting steps.
    To fix the problem:
    1. Make sure that an Ethernet or Internet cable (or a cable like the one
    supplied with your router) is securely connected to the yellow Internet
    port on the back of the router and to the appropriate port on your
    modem. This port on the modem is usually labeled Ethernet, but may
    be named Internet or WAN.
    Back view of router
    Back view of cable modem
    Back view of DSL modem
    2. Make sure that your modem is connected to power and is turned on. If it
    has a power switch, make sure that it is set to the ON or l position.
    3. If your Internet service is cable, verify that the cable modem’s CABLE port
    is connected to the coaxial cable provided by your ISP.
    Or, if your Internet service is DSL, make sure that the DSL phone line is
    connected to the modem’s DSL port.
    4. If your computer was previously connected to your modem with a USB
    cable, disconnect the USB cable.
    5. Install the router again.
    Cannot access your router message
    If you cannot access your router because your computer is not connected to
    your network, follow these troubleshooting steps.
    To access your router, you must be connected to your own network. If you
    currently have wireless Internet access, the problem may be that you have
    accidentally connected to a different wireless network.
    To fix the problem on Windows computers:
    1. On your Windows desktop, right-click the wireless icon in the system tray.
    2. Click View Available Wireless Networks. A list of available networks
    appears.
    10
    Linksys EA-Series Troubleshooting
    3. Click your own network name, and click Connect. In the example below,
    the computer was connected to another wireless network named
    JimsRouter. The name of the Linksys E-Series network, BronzeEagle in this
    example, is shown selected.
    4. If you are prompted to enter a network key, type your password (Security
    Key) into the Network key and Confirm network key fields, then click
    Connect.
    Your computer will connect to the network, and you should be able to
    access the router.
    To fix the problem on Mac computers:
    1. In the menu bar across the top of the screen, click the WiFi icon. A list
    of wireless networks appears. Linksys Smart Wi-Fi has automatically
    assigned your network a name.
    In the example below, the computer was connected to another wireless
    network named JimsRouter. The name of the Linksys E-Series network,
    BronzeEagle in this example, is shown selected.
    2. Click the wireless network name of your Linksys E-Series router
    (BronzeEagle in the example).
    3. Type your wireless network password (Security Key) into the Password
    field, and click OK.
    11
    Linksys EA-Series Specifications
    11
    Linksys EA6350
    Model Name Linksys Smart Wi-Fi Router AC 1200
    Description Dual-Band AC Router with Gigabit and 1×USB
    Model Number EA6350
    Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet)
    Radio Frequency 2.4 and 5 GHz
    # of Antennas 2 external adjustable antennas
    Ports Power, USB (1), Internet, Ethernet (1-4)
    Buttons Reset, Wi-Fi Protected Setup, power
    LEDs Top panel: Power
    Back panel: Internet, Ethernet (1-4)
    UPnP Supported
    Security Features WPA2, RADIUS
    Security Key Bits Up to 128-bit encryption
    Storage File System Support FAT, NTFS, and HFS+
    Browser Support Internet Explorer 8 or higher, Firefox 4 or
    higher, Google Chrome 10 or higher, and
    Safari 4 or higher
    Environmental
    Dimensions 10.8” x 1.58” x 7.25” (256 x 40 x 184 mm)
    Unit Weight 17.67 oz (501 g)
    Power 12V, 2A
    Certifications FCC, IC, CE, Wi-Fi a/b/g/n/draft ac, Windows 7,
    Windows 8, DLNA
    Operating Temp. 32 to 104°F (0 to 40°C)
    Storage Temp. -4 to 140°F (-20 to 60°C)
    Operating Humidity 10 to 80% relative humidity, non-condensing
    Storage Humidity 5 to 90% non-condensing
    NOTES
    For regulatory, warranty, and safety information, see the CD that
    came with your router or go to Linksys.com/support.
    Specifications are subject to change without notice.
    Maximum performance derived from IEEE Standard 802.11
    specifications. Actual performance can vary, including lower
    wireless network capacity, data throughput rate, range and
    coverage. Performance depends on many factors, conditions and
    variables, including distance from the access point, volume of
    network traffic, building materials and construction, operating
    system used, mix of wireless products used, interference and other

    (0)(0)
  3. Timothy.Brown

    Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    In order to set up a Linksys router please follow the instructions below:
    > Make sure the router should be ON and connected to the Computer wirelessly or with an Ethernet Cable.
    > Pull up a Browser and at the top on the address bar type in 192.168.1.1 / https://www.linksyssmartwifi.com
    > You will be directed to a setup wizard screen for Linksys EA6350
    > Please follow the instructions and complete the setup
    > Once the setup is completed, please connect your devices to the router's wifi and it should be good to go.

    (0)(0)
  4. Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    the steps to setup your Linksys EA6350 router:-
    *If You made any kind of changes press the reset button of the router for 30 seconds while it's powered on.
    >Now you need to wait for the router lights to get stable.
    >Make sure the router should be ON and connected to the Computer wirelessly or with an Ethernet Cable.
    >Open up a new browser and type IP on the top address 192.168.1.1
    >then follow the instruction and complete the steps
    >once you complete the steps connect the router with your devices.

    (0)(0)

Leave an answer

Browse

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>