Answers ( 6 )

  1. Mark.Tech

    Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    You can also use wps setup to get your extender to the router.

    IF YOUR ROUTER SUPPORTS WPS ,YOU CAN FOLLOW THESE STEPS -

    1.PRESS AND HOLD THE WPS BUTTON ON YOUR ROUTER FOR THREE SECONDS AND THEN YOU WILL SEE A LIGHT BLINKING.
    2.THEN PRESS AND HOLD THE WPS ON YOUR EXTENDER AND YOU WILL SEE A LIGHT BLINKING THERE AS WELL.
    3.NOW YOU WILL SEE THE STABLE POWER LIGHT ON YOUR EXTENDER.
    4.SOLID GREEN MEANS ITS SETUP AND YOU CAN CONNECT YOUR DEVICES.
    5.THE PASSWORD FOR EXTENDERS WIFI WILL BE SAME AS YOUR ROUTER.

    (1)(0)
  2. Alan Walker

    Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    Steps to comfigure extender :-
    Connect via Wi-Fi to your NETGEAR WiFi extender
    Login to the web user interface of your NETGEAR WiFi Extender using http://myWiFiext.net.
    You will be prompted to enter a username and password.
    Default login credentials are:
    Username: admin
    Password: password
    Note: Username and password are case sensitive.
    Walk through the setup wizard to setup your connection to your Access Point. (Do not use WPS when reconnecting to the Access Point)
    Reconnect your Wi-Fi devices to your NETGEAR WiFi Extender using either the WPS button or manual connection.

    (2)(0)
  3. Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    I thank for the information.

    (1)(0)
  4. Shawn white

    Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    TO CONNECT YOUR EXTENDER YOU NEED TO FOLLOW THESE STEPS
    1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
    2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
    3.PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE ALSO).
    4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
    5.YOU WILL SE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
    6.CONNECT TO THE SAME NETWORK .
    7. IT WILL OPEN A SETUP WIZARD FOR YOU.
    8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
    (IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
    FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024.

    (0)(0)
  5. DAVE ADAMS

    Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    THERE ARE SEVERAL WAYS TO CONNECT YOUR NETGEAR EXTENDER I.E ETHERNET CABLE METHOD ,WPS METHOD AND MANY MORE BUT I AM SHARING WPS METHOD HERE FOR WPS METHOD YOU NEED TO FOLLOW THESE STEPS:-
    1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET NEAR BY YOUR ROUTER FOR SETUP.
    2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
    3. PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE
    ALSO).
    4. IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
    5. YOU WILL SE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
    6. CONNECT TO THE SAME NETWORK .
    7. IT WILL OPEN A SETUP WIZARD FOR YOU.
    8. FOLLOW THE ON SCREEN INSTRUCTIONS AND YOU ARE GOOD TO GO NOW.
    (IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
    FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024.

    (0)(0)
  6. Leo

    Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    You need to follow these steps-

    1.You can plug the extender into wall socket .
    2.Take an ethernet cable and plug it one end into extender and other into router's Lan port.
    3.Now your extender is physically connected with router.
    4.Now open your browser and type Http://mywifiext.net or try 192.168.1.250 .
    5.Setup wizard will appear .Just follow the steps and complete the setup.

    (0)(0)

Leave an answer

Browse

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>