How to connect Dlink DAP1610 extender with the shaw router?
- Turn On your Dlink Extender
- Connect your Computer or Smartphone with the Extender's wifi Network
- Now open your browser and type this address:- 192.168.0.50
- It will take you to the setup page where it will ask for the Login password( and by default, there is no password for the Dlink Extender so just leave that field blank and hit login)
- Once you are logged in, then follow the instructions on the screen and complete the setup page
To setup Dlink DAP1610 range extender follow these steps:-
>Plug-in the Dlink range extender near to your shaw router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
>Connect any one of your wired or wireless devices with Dlink extender network.
>Open any browser and in the address bar type http://192.168.0.50 or http://dlinkap.local
>Now you will see the setup wizard on the page, click on it and after that follow the onscreen instructions.
>From the list select network that you want to extend and then enter the password for the same.
>In the next step if you want you can change the name of extended network and password of your choice that you want for it.
>Now save the settings and wait for the lights to get stable.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.
if you want to connect your dlink extender with your router for that you need to plug i extender with power socket
then connect any device to the extender by using the ip address of the dlink extender 192.168.0.1
you will reach on the setup page of the extender ..
you just need to follow all the step to get it configured with your home network
then creat any password for the extended network to make it secure
save it ..
- Plug in the extender near to the shaw router for initial setup.
- connect any device to the extender that is working on the same network.
- Open the setup page by using the ip address 192.168.0.50.
- From the list select the network on which you want to setup the extender and enter the password for the same.
- You can change the password and the name of the connection if you want.
- Save the settings and wait for the extender'sย light to get stable.\
Steps you need to follow :-
- Plug-in the Dlink range extender near to your Shaw router for the initial setup.
- Connect any of your wired or wireless devices with Dlink extender network.
- Open any browser and in the address bar type http://192.168.0.50 or http://dlinkap.local
- Now you will see the setup wizard on the page, click on it and after that follow the instructions.
- From the list select network that you want to extend and then enter password for the same.
- In the next step if you want you can change the name of extended network and password of your choice that you want for it.
- Now save the settings and wait for the lights to get stable.
- Now extender setup done successfully.