How to setup my 2 Linksys RE6350 range extenders with Frontier router?
Step 1:
Plug the Linksys RE6350 into a power outlet and wait for the light indicator to turn orange.
Plug the range extender into a power outlet halfway between your router and the dead zone.
Step 2:
Connect to the range extender’s default WiFi name, Linksys Extender Setup, using a wireless computer or a tablet.
Step 3:
Enter "192.168.1.1" in a supported browser's Address bar and press [ENTER] to launch the setup.
Step 4:
Click the Manual Setup link.
Step 5:
Enter the default Password which is admin and click Login.
Step 6:
Configure your manual settings such as the wireless Network Name (SSID) and password for both 2.4 GHz and 5 GHz networks.
Step 7:
Click Save to apply changes.
You have now successfully set up your Linksys RE6350.
To setup Linksys RE6350 range extender follow these steps:-
>Plug in the range extender into the wall socket near to your Frontier router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
>Connect any of your wireless devices with Linksys extender wireless network.
>Open any browser and in the address bar type http://192.168.1.1 or http://extender.linksys.com
>Now you will see the setup wizard in the page, follow the instructions to setup the range extender.
>If you want you can change the name of extended network and password of your choice that you want for it.
>Now save the settings and range extender will reboot after saving the settings.
Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.
After this repeat the same steps to configure the 2nd extender.
- Turn On your Linksys extender
- Connect your smartphone or computer with the Extender’s network
- Now open your browser and type this address:- 192.168.1.1
- it will take you to setup page of the extender page
- Now follow the instructions on the screen and complete the setup process
And repeat the same steps for the Second Extender also.
