0
nguyen
can't login TP-Link Archer C50
If you want to configure TP-Link router, you have to login TP-Link router by opening the website tplinkwifi.net. It asks you to enter default credentials. After Login, you can change settings of the tplink router like enable guest network, set Parental controls.
click tplinklogin.net for more information
0 Subscribers
Submit Answer
1 Answers
Best Answer
0
For TPLink ARCHER- C50 you need to connect your device with router hardwire or wifi.
Once you are connected ,Open your browser and simply type http://tplinkwifi.net or try 192.168.0.1 /192.168.1.1.
You will get the login screen .Type user login details .(Default-admin for both username and password)
Make sure your router is connected into direct wall socket.No SURGE PROTECTOR or any EXTENSIONS !!
Replying as
Submit
If you are not able to login to tp link device it seems either you are not tying correct password or you are not connected to the same network. if you are connected to the network and forgot the password follow these steps:
1. Reset your device with the help of paperclip.
2. Check your default gateway and open a browser.
3. Type default gateway in address bar that is tplinklogin.net and hit enter key.
4. It will ask your username and password .
5. Default username-admin password-admin.
6. It will open a setup wizard for you go through the steps and you are good to go now.
Login issues can be occur due to-
-No firmware upgrade done .
-Connected router power in power surge or extension.
-Not connected to router .(wifi or hard wire)
-Trying some wrong website to reach your router.
For TPLink ARCHER- C50 you need to connect your device with router hardwire or wifi.
Once you are connected ,Open your browser and simply type http://tplinkwifi.net or try 192.168.0.1 /192.168.1.1.
You will get the login screen .Type user login details .(Default-admin for both username and password)
Make sure your router is connected into direct wall socket.No SURGE PROTECTOR or any EXTENSIONS !!
If you are connected with the router and you are able to use internet it means there could a firmware issue or due to some internet firewall you are not able to access the router page,i will suggest you resetting the router and follow this guide to set it up again.
1.PLUG IN THE ROUTER TO THE POWER.
2.Connect an Ethernet cable from modem to your router’s WAN port.
3.Connect another cable from router to computer .
4.Now open your browser and type in the address bar http://tplinkwifi.net .
5.follow the instructions on the screen.
6.Once your setup is completed remove the ethernet from computer.
If the tplink router is not working after the reset , try to do the following steps:
> First try to reset the router again, Press and hold the reset button down for 30 seconds
> Wait for at least 2 minutes the let the router boot up and then try to configure the router again manually
> if still the router is not working
> press and hold teh reset button down for 30 seconds.
> While holding the reset button unplug the router from the power and keep holding the reset button, wait for 30 seconds
> plug in the router back to the power while holding the reset button and wait for 30 seconds and then release the reset button
> wait for at least 5 minutes, once you see a solid power light and a solid wifi light reconfigure the router and it should work.