0
johnold44
EXTENDER MODEL NO-tlwa860re
TRYING TO CONNECT BUT NOT WORKING
0 Subscribers
Submit Answer
1 Answers
Best Answer
0
In order to connect your Tplink Extender with the router, we have to follow some steps which are shown below:-
- Turn ON your Tplink Extender
- Connect your computer with the Extender's network
- Open your browser and type this address:- 192.168.0.254
- It will take you to the setup page
- create your login information
- Now it will scan for the available wifi networks, select your wifi network and hit next
- enter your wifi password and then hit next again
- On the next page, create your wifi information for your extender and then save the settings.
Replying as
Submit
To Connect your tp link extender TLWA 860RE you need to follow these steps:
1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
3.PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE ALSO).
4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
5.YOU WILL SEE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
6.CONNECT TO THE SAME NETWORK .
7. IT WILL OPEN A SETUP WIZARD FOR YOU.
8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
(IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
Tplin-Tlwa860re is a great extender .Easy to setup with AC pass through which helps you to save your power socket for the devices.
Plug your extender in direct wall socket .
Once you are connected and got solid power light on it connect your wireless device to extender network .
Pull up your browser and type http://tplinkrepeater.net or 192.168.0.254 otherwise auto setup also appears in some cases .
You need to login with default login information (admin and admin ) for both user and password.
setup wizard will start and just follow the steps and thats it .
Setting up tp-link extender is really easy using WPS button. Here are the steps you will need to follow,
1.First you will need to place the tp-link extender near to your router and then plug the power to WiFi extender.
2.Press the WPS button located at the tp-link extender and do the same on your router, within two minutes, tp-link extender will connect itself with the existing network.
3.Type http://tplinkrepeater.net or 192.168.0.250 in address bar ,if the setup is not working.
4.You will notice that the LED status will be solid green,it means the extender is not working.
Once your tp-link extender is connected with the existing network you can place the WiFi extender where the dead zones are at your location.
If the tplink Extender is not working , try to do the following steps:
> First try to reset theExtender , Press and hold the reset button down for 30 seconds
> Wait for at least 2 minutes the let the Extender boot up and then try to configure the Extender again manually
> if still the Extender is not working
> press and hold the reset button down for 30 seconds.
> While holding the reset button unplug the Extender from the power and keep holding the reset button, wait for 30 seconds
> plug in the Extender back to the power while holding the reset button and wait for 30 seconds and then release the reset button
> wait for at least 5 minutes, once you see a solid power light and a solid wifi light reconfigure the Extender and it should work.