I am trying to figure this out from hours but nothing helping out?
Plugin the extender into the wall socket and make sure it is in the at least 5 feet range from the main router for the initial setup.now press and hold the WPS button on the router for 5 seconds and then within 1-minute press and hold the WPS button on the extender for 3 seconds and now with the help of any laptop or computer connect to the extender wifi and then open the browser.in the long address bar of your browser type the IP address of the extender and it will open the login dashboard, fill in the login detailsonce you are logged setup the security password and save the settings.
plugin the extender into the wall socket at least 10 feet from the router just for the initial setup.
now press and hold the WPS button on the router for 10seconds and then within 1 min press and hold the WPS button on the extender for 5 seconds.
now connect any wireless device with the extender and open the browser
type the IP address of the extender into the URL bar of the browser and that will take you the login page, fill up the login credentials and then set up the password security and save the settings
now your extender is ready to extend the range of your router.
The steps are really simple if you want to set up Tp-link WP4220 extender with existing router:-
• First of all, access the login page for TP-Link WP4220 extender setup page.
• After successful login to setup page, go for the “Network” option.
• Here, you will need to make sure that the IP address for the TP-Link WP4220 extender is in the same range as the router you are using.
• After that, save the settings.
• Then, go for the “Quick Setup” option.
• Next and then go for Wireless settings.
• Select for the Range Extender work as operation mode.
• Click on the “search” option.
• A list will be displayed from where you will need to select the SSID for the root router.
• Save the settings by clicking on “Save” button.
• Click on the “Wireless” option and then go for “Wireless Security” option.
• Here you will need to select the WPA-PSK/WPA2-PSK, and Encryption AES option.
• Click on “Save” button to save all the settings you have made here.
You can also contact Router Login Support team for the help if you are facing any kind of issue following these steps.
Setting up tp-link extender is really easy using WPS button. Here are the steps you will need to follow.
1.First you will need to place the tp-link extender near to your router and then plug the power to WiFi extender.
2.Press the WPS button located at the tp-link extender and do the same on your router, within two minutes, tp-link extender will connect itself with the existing network.
3.Type http://tplinkrepeater.net or 192.168.0.250 in address bar ,if the setup is not working.
4.You will notice that the LED status will be solid green.
Once your tp-link extender is connected with the existing network you can place the WiFi extender where the dead zones are at your location.
TO CONNECT YOUR TP LINKWP 4220 EXTENDER YOU NEED TO FOLLOW THESE STEPS
1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
3.PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE ALSO).
4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
5.YOU WILL SE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
6.CONNECT TO THE SAME NETWORK .
7. IT WILL OPEN A SETUP WIZARD FOR YOU.
8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
(IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024.
To setup your TP-link Powerline extender -WP4220 follow these steps-
1.Plug both powerline and extender in wall socket.Do not use surge protector or any extension.
2.Connect an Ethernet cable from power line to your router .
3.Then connect another ethernet cable from wifi extender powerline to your computer.
4.On your computer open your browser and type- http://tplinklogin.net.
5.It will open setup wizard just configure with your custom settings.
6.If you need to create a secure powerline connection just press pair button on both the powerline.
NOTE- You can only use secure connection when you don’t need to move wifi extender powerline from its place.
7.When ever you need to connect look for extender network name the one you created .
In some cases we have seen the power line gets disconnects a lot. Simply call us on our toll free-1-800-603-4024 .
Our technicians will provide you the most appropriate solutions for your quires .
In order to configure the range extender you need to follow the instructions below:
> plug in your extender near to the router for the initial setup within 10 feets
> Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
> Once you see the light stopped flashing on the extender it means the extender is setup now
Step 2
> Connect your computer wireless to the extended network
> pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
> You will get through a login window default username: admin and the Password : admin
> click on quick setup and Continue , Follow the instructions to complete the setup