RE6350

0
DENNIS42
Jul 17, 2018 12:20 AM 0 Answers
Member Since Jul 2018
Subscribed Subscribe Not subscribe
Flag(0)

How do I connect my linksys re6350  extender with my downstairs computer through wifi?

0 Subscribers
Submit Answer
Please login to submit answer.
0 Answers
Sort By:

Leave a reply

5 comments
  • Step 1: Plug the Linksys RE6350 into a power outlet and wait for the light indicator to turn orange.
    Step 2: Connect to the range extender’s default WiFi name, Linksys Extender Setup, using a wireless computer or a tablet.
    Step 3: Enter “http://extender.linksys.com” or “192.168.1.1” in a supported browser’s Address bar and press [ENTER] to launch
    the setup.
    Step 4: Click the Manual Setup link.
    Step 5: Enter the default Password which is admin and click Login.
    Step 6: Configure your manual settings such as the wireless Network Name (SSID) and password for both 2.4 GHz and 5 GHz
    networks.
    Step7: Click save to apply changes



    0



  • #To setup your LINKSYS RE6350 extender kindly follow these steps:-
    -Plug in your extender in to the wall socket
    -Press the reset button/Pin hole on your extender for 10 seconds .
    -Wait Till the time all lights on you extender are back again.
    -Now you can connect your computer with the extended network.
    -Once connected with network open the Default IP of your extender i.e 192.168.1.1, “http://extender.linksys.com”
    -Now follow the steps and set up your extender with the existing network
    -Once configured You can took your extender to the place where you would like to use it
    -Connect your devices with the extended network .



    0



  • For new Linksys re6350 Extender.
    Just press the WPS on your router/modem first for 1-2 seconds, then press the WPS on Linksys re6350 Extender for 3-5 seconds.
    Now wait for 2 minutes.
    The difference in light color and pattern will confirm its connection.

    For Used/ old Extender: If its an used Linksys re6350 Extender then first reset it using a paper clip to press the reset button in a tiny hole for 30 seconds.
    Now its brand new, or by default one.
    Wait for 2 minutes after reset then proceed further as setup New Linksys re6350 Extender.

    Its now extending your home network with same password as of your home wifi.

    Note:
    1. During setup, make sure that the Linksys re6350 Extender is placed within 7-10 feet from Router, at the time of setup, or in the same room.
    2. Two minutes patience is the Critical Time that make the difference between success and failure in Setup.
    3. Best of luck



    0



  • you just need to install the range extender on the same room where the computer is just kept in mind it should be 25-30 feet from the router.



    0



  • In order to set up the RE6350Range extender you would need to follow the following steps:
    Step 1
    > First connect your computer wireless or wired to the range extender
    > login to extender.linksys.com or 192.168.1.1
    > initiate the setup.
    Step 2
    > Press the WPS button on the router first for 3 seconds and then on the extender for 3 seconds once the light on the extender stops blinking the setup is complete.

    Once the setup is complete connect your computer to the extended netwrok



    0



Written by DENNIS42
Router Categories