0
michael mccarthy
How to setup Wicommfi Extender?
0 Subscribers
Submit Answer
0 Answers
To setup Wicommfi CF-WR750AC range extender follow these steps:-
>Plugin the range extender into the wall socket near to your home router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
>Connect any of your wireless devices with tplink extender wireless network.
>Open any browser and in the address bar type 192.168.10.1
>In the login page type username (admin) and password (admin)
>Now you will see the setup wizard in the page, follow the instructions to setup the range extender
>If you want you can change the name of extended network and password of your choice that you want for it.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.
To setup Wicommfi CF-WR750AC range extender follow these steps:-
1)Plugin the range extender into the wall socket near to your home router for the initial setup.
2)Connect any of your wireless devices with TP-Link extender wireless network.
3)Open any browser and in the address bar type 192.168.10.1
4)In the login page type username (admin) and password (admin)
5)Now you will see the setup wizard in the page, follow the instructions to set up the range extender
6)Now save the settings and range extender will reboot after saving the setting if It Doesn’t Then Just Unplug It From The Wall and Plug It Back Again After 3 Minutes.
8)Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.
First connect the extender to the wall socket and wait for the power wifi light to be blinking
Then on your computer you will see the name as wicommfi ext both (2.4g-5g) in wireless network list.
Open a web browser and type the ip address at the very top (192.168.10.1) and press Enter.
You will get the setup page type (Admin) for both username and the password click login.
Follow the steps choose the repeater mode from the dashboard as you want to connect it as extender
Choose your network name and connect to it.Put the new name from which you can recognize your extender.
Connect to it and wait for few seconds and you will be good to go.Internet will be working on all the devices through your extender
#To setup your WICOMMFI range extender kindly follow these steps:-
-Plug in your extender in to the wall socket
-Press the reset button/Pin hole on your extender for 10 seconds .
-Wait Till the time all lights on you extender are back again.
-Now you can connect your computer with the extended network.
-Once connected with network open the Default IP of your extender i.e 192.168.10.1
-Now follow the steps and set up your extender with the existing network.
-Now save the settings and range extender will reboot after saving the settings.
-Once configured You can took your extender to the place where you would like to use it
-Connect your devices with the extended network .
Before you setup the Extender, plug it in to the wall in the same room as of your main Router.
First, Press and hold the WPS from your Router for 3 second and then, WPS from your WiCommFi Extender for 15 seconds.
Wait for 2 minutes and then place this Wicommfi Extender mid-way to Router and the dark spot. It will connect with TV and other devices, with the same password as of your main Wifi Network, also same name with .EXT in the end.
Best connect with lightning Fast 5.8GHz Network for TV and Gaming Consoles like X-Box and Play station.
In order to setup your wicommfi range extender device as a repeater, Please follow the steps below:
> Plug your extender near to the router for the initial setup
> Connect your computer to the open wifi of your wicommfi extender
> pull up a browser and at the very top on the address bar type in 192.168.10.1 and hit Enter
> Login screen will come up default username: admin and Password : admin click on login
> Click on repeater mode > choose your existing network > enter your wireless password for the existing wifi
> wait and the setup is complete
> put the extender to the new location where you want it and connect your devices to it.