Leave a reply

4 comments
  • First step is to connect your TP-Link router with your modem through Ethernet cable. Connect your computer to the TP-Link Wi-Fi network. It will ask you for a passcode. Look at the bottom of the router. Once you are connected try opening login page (TPLINKWIFI.NET, TPLINKLOGIN.NET) or try the IP address 192.168.0.1. It will open the login page and use admin for both username and password. Then you will see setup page.



    0



  • You need to first connect your router to your existing router with a Ethernet cable, then open http://tplinkwifi.net/ web address. Then you will see a place where you need to type username and password, the username and password is admin and you will be logged in and setup is done change any settings according to your liking.



    0



  • for wireless setup of tp link router follow these steps

    1. connect a cable to the internet port of router from modem.
    2.connect another cable from port number 4 of your router to your computer ethernet port.
    3. Press windows + R key that will open run window for you.
    4. Type CMD in the run box.
    5.Open Ipconfig and check network statistics.
    6.Open your default gateway in any browser
    7.give default password to the prompt which is admin for both.
    8. this will open a setup wizard follow the steps and you are good to go now.
    If problem still persists you can reset your device and change your settings .
    In case of any questions and query feel free to call us on 1-800-603-4024.



    0



  • In order to setup your tplink router follow the steps given below:
    > Connect a cable from your modem’s LAN port to the internet port of the router
    > Connect your computer wireless to the routers default SSID or via Ethernet cable
    > Pull up a browser and at the top on the address bar type in 192.168.0.1 and hit enter
    > you will come through your router login screen default username : admin and Password : admin
    > setup page will come up , Follow the instruction to complete the setup
    Note : It should be Dynamic Ip and do not clone the MAC of the computer.



    0



Written by carl
Router Categories